Hikvision DS-3E1105P-EI 4 port Smart PoE Switch
- 4 × 10/100 Mbps PoE port,1 × 10/100 Mbps RJ45 port
- 6 KV surge protection for PoE ports.
- Total PoE Power Budget 60W
- Support 802.1Q VLAN
- Support PoE watchdog to detect and restart the cameras that do not respond
- Support STP/RSTP Loop prevention
- Support cable detection to locate failure
- Up to 300 m Long Range PoE Transmission
Hikvision DS-3E1105P-EI 4 port Smart PoE Switch
Key features
- PoE Budget: The switch provides a PoE power budget suitable for powering multiple PoE devices simultaneously. The exact power budget may vary depending on the specific model and configuration.
- Smart Management: The DS-3E1105P-EI offers smart management capabilities, enabling basic configuration and monitoring of network settings. This includes features such as VLAN (Virtual Local Area Network) support, QoS (Quality of Service) prioritization, and port mirroring.
- Compact Design: With its compact form factor, this switch is suitable for desktop or wall-mounted installations, making it ideal for deployment in small offices, retail stores, or home networks.
Specifications
| Model | DS-3E1105P-EI | |
|
Network Parameters | Ports | 4 × 10/100 Mbps PoE port,1 × 10/100 Mbps RJ45 port |
| MAC Address Table | 2 K | |
| Switching Capacity | 10 Gbps | |
| Packet Forwarding Rate | 7.44 Mpps | |
| Internal Cache | 1 Mbits | |
|
PoE Power Supply | PoE Standard | IEEE 802.3af,IEEE 802.3at |
| PoE Power Pin | End-span: 1/2(-), 3/6(+) | |
| PoE Port | PoE: Ports 1 to 4 | |
| Max. Port Power | 30 W | |
| PoE Power Budget | 60 W | |
|
Software Function | Long Range | Ports 1 to 4: up to 300 m. Long range performance may vary depend on camera model or cable condition. |
| VIP Port | Ports 1 to 2: data on VIP ports is preferentially forwarded when bandwidth resources are insufficient. | |
| Port Isolation | Ports 1 to 4: port isolation mode to improve network security Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group. | |
| PoE Watchdog | Ports 1 to 4: auto detect and restart the cameras that do not respond. | |
| Link Aggregation | Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 1 aggregation groups. | |
| Loop Prevention | Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP. Suppport 802.1w RSTP. | |
|
VLAN | VLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 32 VLAN. | |
|
HPP | Support one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device. | |
| System Maintenance | Support device management via web. Support DHCP Client. Enabled by default for dynamic assignment of management | |
| IP addresses. Support Super IP, which is a fixed IP address (10.180.190.200) for direct access. Support management via Hik-Central Pro. Support remote management via Hik-Partner Pro. Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Supports 802.1ab LLDP for peer device discovery. Support port mirroring for fault locating. | ||
|
General | Shell | Metal material |
| Net Weight | 0.26 kg (0.573 lb) | |
| Gross Weight | 0.75 kg (1.65 lb) | |
| Dimensions (W × H × D) | 121.1 mm × 27.6 mm × 83.1 mm (4.77” × 1.09” × 3.27”) | |
| Operating Temperature | 0 °C to 40 °C (32 °F to 104 °F) | |
| Storage Temperature | -40 °C to 85 °C (-40 °F to 185 °F) | |
| Operating Humidity | 5% to 95% (no condensation) | |
| Relative Humidity | 5% to 95% (no condensation) | |
| Power Supply | 54 V DC, 1.2 A | |
| Installation Mode | Desk-Mounted,Wall-Mounted | |
| Max. Power Consumption | 65 W | |
| Power Consumption in Idle | 0.9 W | |
| Surge Protection | 6 kV | |
|
Approval | EMC | CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020) |
| Safety | CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017) | |
| Chemistry | CE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006) |
Be the first to review “Hikvision DS-3E1105P-EI 4 port Smart PoE Switch”
You must be logged in to post a review.
Related products
Hikvision Network IP Cameras
Hikvision IP PTZ Cameras
Hikvision Network IP Cameras
Hikvision IP PTZ Cameras
Hikvision DS-2DE4215IW-DE(T5) 2MP 15 × Network IR Speed Dome
Reviews
There are no reviews yet.